by: Chad Kimball
Does your basement ever flood? Is your basement ever damp? If so, you may need to inspect your basement for mold, and possibly remodel it to remove the mold. You may suspect hidden mold if your basement smells moldy, but you cannot see the source. You may know there has been water damage, but not think there is mold. Mold may be hidden in places such as the back side of drywall, behind wallpaper, or paneling, the top side of ceiling tiles, underneath carpets and pads, etc.
Mold could also be hidden around leaking pipes, or pipes that are constantly covered with condensation. Heat and air conditioning ducts also can hide mold that can affect your family.
You may want to hire an experienced professional when investigating in your basement for mold, because sometimes when looking for mold, spores can be released that are dangerous for your health. You would be amazed at how many mold spores can be released when pulling off basement wallpaper.
Conventional construction materials used in basement remodeling and basement construction in the past are perfect for mold growth. Since they frequently contain wood and paper based products, they provide a great food source for mold, as well as soaking and holding water for long periods of time.
Here are some tips for preventing mold growth in your basement:
1. Control mold growth by acting quickly when water leaks or spills in your basement. Make it a goal to have any basement leaks or spills to be completely dry in 24-48 hours.
2. Make sure the ground outside your home slopes away from the building, so water is directed away from the house instead of collecting and leaking into the basement.
3. Purchase a humidity meter at the hardware store, and keep basement humidity below 60 percent.
4. If you see a lot of condensation on your basement pipes or basement windows, work fast to reduce humidity and dry those surfaces. Lots of condensation can be a sign of high humidity in your basement.
5. Run a dehumidifier in your basement. It will do wonders to pull moisture out of the air, preventing mold growth.
6. Make sure clothes dryers are vented outside of the basement, not inside. The moisture from drying clothes stays in the air and can encourage basement mold growth.
7. If you have a shower in your basement bathroom, install an exhaust fan to pull moist air out of the bathroom while the shower is running.
8. Cover cold surfaces like cold basement water pipes with insulation to prevent basement condensation.
9. Increase the temperature of your basement. Hot air can hold more moisture without causing condensation on basement surfaces.
10. Use fans to keep the air moving. A well ventilated basement will be less likely to become moldy.
About The Author
Chad Kimball
If you are considering basement remodeling or basement finishing, did you know you can create your new basement out of mold resistant materials? Breakthrough technology has created mold resistant basement finishing systems so you never have to worry about mold again. Visit http://www.impressivebasementsystems.com for details.
Thursday, January 29, 2009
Wednesday, January 28, 2009
The Basics of Water Damage Control
by Leo Nov
Water is considered to be the single most long term destructive chemical compound in the indoor environment. Since water is considered as the "universal solvent" it can dissolve or weaken many materials. Water also supports the growth of different microorganisms such as molds on other materials. Because water is fluid or is capable of flowing, it has the capability to carry with it a great number of biological pathogens and chemical allergens which can cause discomfort and sickness to humans.
In an ideal world, houses and other types of buildings would be designed in such a way that flooding would never be a problem to them. However, in the real world, water damage may occur due to a number of reasons such as burst pipes or the overflowing of nearby rivers or streams. Whatever the reason of the water damage, immediate reaction to seepage, spillage, backups and flooding has many benefits. Immediate and efficient reaction to water emergencies can lead to saving valuable household properties from direct water damage as well as their destruction due to mold growth. When water damage is left untreated for a long period of time, then the amount of damage done to the materials will also increase. The quick response to any water emergency can lead to the protection of property and the health of the household inhabitants. Immediate reactions to a water crisis will lessen the amount of water damage and will eventually save time and money.
Professional restorers and water damage experts know the primary objectives of controlling water damage. The first objective of water damage control is to protect the health of the public by removing any harmful substances that enter into the indoor environment with flowing water. Since water carry with it different contaminants, it is important to get rid of the contaminated water that enters the buildings. The use of pumps is an effective way of getting rid of excess water that has collected in low areas of the house. If the water crisis is caused by flooding, it is important to remove mud and other debris that has flowed in with flood waters.
The next objective is to restore the indoor environment to its original dry state. Areas that have been soaked underwater should be dried immediately within a 48 hour period. This will ensure that molds have not yet started to grow and spread to different areas of the house.
The third and final objective is to try to salvage the valuable properties that were affected due to water damage. Different methods can be used in restoring household items that have been affected by water damage. A company that specializes in water damage restoration can be hired to ensure the proper restoration of damage items.
The length of the drying and restoration process will greatly depend on the quality of the water that enters the indoor environment. If the water emergency involves clean water coming from water supply lines, then clean up will be faster and easier. Water damage caused by flood waters or sewage will take a longer and more complicated process.
About the Author
Leo Nov is an editorial staff member of RestorationSOS.com, a leading service provider for water damage cleanups. To learn more about {a href=" http://www.restorationsos.com/ " title="Basement Flood"}basement flood and water restoration, visit RestorationSOS.com.
Water is considered to be the single most long term destructive chemical compound in the indoor environment. Since water is considered as the "universal solvent" it can dissolve or weaken many materials. Water also supports the growth of different microorganisms such as molds on other materials. Because water is fluid or is capable of flowing, it has the capability to carry with it a great number of biological pathogens and chemical allergens which can cause discomfort and sickness to humans.
In an ideal world, houses and other types of buildings would be designed in such a way that flooding would never be a problem to them. However, in the real world, water damage may occur due to a number of reasons such as burst pipes or the overflowing of nearby rivers or streams. Whatever the reason of the water damage, immediate reaction to seepage, spillage, backups and flooding has many benefits. Immediate and efficient reaction to water emergencies can lead to saving valuable household properties from direct water damage as well as their destruction due to mold growth. When water damage is left untreated for a long period of time, then the amount of damage done to the materials will also increase. The quick response to any water emergency can lead to the protection of property and the health of the household inhabitants. Immediate reactions to a water crisis will lessen the amount of water damage and will eventually save time and money.
Professional restorers and water damage experts know the primary objectives of controlling water damage. The first objective of water damage control is to protect the health of the public by removing any harmful substances that enter into the indoor environment with flowing water. Since water carry with it different contaminants, it is important to get rid of the contaminated water that enters the buildings. The use of pumps is an effective way of getting rid of excess water that has collected in low areas of the house. If the water crisis is caused by flooding, it is important to remove mud and other debris that has flowed in with flood waters.
The next objective is to restore the indoor environment to its original dry state. Areas that have been soaked underwater should be dried immediately within a 48 hour period. This will ensure that molds have not yet started to grow and spread to different areas of the house.
The third and final objective is to try to salvage the valuable properties that were affected due to water damage. Different methods can be used in restoring household items that have been affected by water damage. A company that specializes in water damage restoration can be hired to ensure the proper restoration of damage items.
The length of the drying and restoration process will greatly depend on the quality of the water that enters the indoor environment. If the water emergency involves clean water coming from water supply lines, then clean up will be faster and easier. Water damage caused by flood waters or sewage will take a longer and more complicated process.
About the Author
Leo Nov is an editorial staff member of RestorationSOS.com, a leading service provider for water damage cleanups. To learn more about {a href=" http://www.restorationsos.com/ " title="Basement Flood"}basement flood and water restoration, visit RestorationSOS.com.
Tuesday, January 27, 2009
Eliminate Carpet Mold and Mildew Safely
Your carpets are totally vulnerable against mold and mildew. Free your carpets from mold and mildew.
In definition, carpets are weighty fabrics made of different materials and traditionally used for indoor floor coverings and occasionally hung on walls for decorations. If you have carpets you generally tack or cement them to the floor along with an underlay of cushion or padding. As the carpet industry grew, we now have carpeting on almost every market particularly in public and commercial buildings. With the latest breakthroughs in tufting and dyeing techniques, the improved material of modern carpets is almost perfect and because of this, carpets are now made of superior quality. But what is unchanged even until now is that carpets can be victim to carpet mold and mildew.
Carpets are used to cover the floors which are basically an important part of your house and used to enhance the durability of the floor’s surface, sound absorption and for easy maintenance but they still can fall prey to the clutches of mold and mildew. These disease-causing organisms thrive on moist surroundings and carpets can definitely be a place where we can have mold and mildew. Our floors tend to absorb moisture as well and so our carpets can be susceptible to mold and mildew. Once their presence is confirmed they can spread to almost any surface of the house.
Even if you are not allergic to mold and mildew you may eventually form a type of sensitivity to it. Mold and mildew have been identified to cause allergic attacks and may even cause irreparable damage to your internal organs such as your lungs. The moment that you find mold and mildew in your carpets, you must remove these disease-causing organisms at once. Because ordinary mold and mildew killers are made of harsh and toxic materials that are not actually safe for handling you have to be careful in buying the right products for eliminating mold and mildew. Always make sure that the mold cleaning products you purchase do not have chemicals that might pollute the environment not to mention endanger the well-being of you and your family.
These latest breakthrough products in mold and mildew removal also do not emit harsh and toxic fumes that pollute the air you breathe guaranteeing that no harm will come to the environment. You have to make use of products that can effectively eliminate mold and mildew from your carpets forever and to always make sure that they are made of all natural and organic materials which means that they are safe for you to use and environmentally friendly as well. Mold and mildew must be quickly removed from your house. Never let mold and mildew get the most of your floor coverings and be prepared and select the exactly those products that are both safe and effective.
By making preventive measures then every corner of your house will not be unprotected to mold and mildew. You will end with have a safe haven for you and your family as it should be. You can still carry on in enjoying your carpeted floors and not worry of being controlled by and getting sick from mold and mildew. With the right products and information you will without a doubt do well in mold and mildew prevention.
Markus Skupeika
Web Entrepeneur
Most people do not realize that black mold can become toxic mold if not taken care of immediately. Learn which cleaning products will remove black mold safe and effectively.
By Markus Skupeika
Published: 4/23/2008
In definition, carpets are weighty fabrics made of different materials and traditionally used for indoor floor coverings and occasionally hung on walls for decorations. If you have carpets you generally tack or cement them to the floor along with an underlay of cushion or padding. As the carpet industry grew, we now have carpeting on almost every market particularly in public and commercial buildings. With the latest breakthroughs in tufting and dyeing techniques, the improved material of modern carpets is almost perfect and because of this, carpets are now made of superior quality. But what is unchanged even until now is that carpets can be victim to carpet mold and mildew.
Carpets are used to cover the floors which are basically an important part of your house and used to enhance the durability of the floor’s surface, sound absorption and for easy maintenance but they still can fall prey to the clutches of mold and mildew. These disease-causing organisms thrive on moist surroundings and carpets can definitely be a place where we can have mold and mildew. Our floors tend to absorb moisture as well and so our carpets can be susceptible to mold and mildew. Once their presence is confirmed they can spread to almost any surface of the house.
Even if you are not allergic to mold and mildew you may eventually form a type of sensitivity to it. Mold and mildew have been identified to cause allergic attacks and may even cause irreparable damage to your internal organs such as your lungs. The moment that you find mold and mildew in your carpets, you must remove these disease-causing organisms at once. Because ordinary mold and mildew killers are made of harsh and toxic materials that are not actually safe for handling you have to be careful in buying the right products for eliminating mold and mildew. Always make sure that the mold cleaning products you purchase do not have chemicals that might pollute the environment not to mention endanger the well-being of you and your family.
These latest breakthrough products in mold and mildew removal also do not emit harsh and toxic fumes that pollute the air you breathe guaranteeing that no harm will come to the environment. You have to make use of products that can effectively eliminate mold and mildew from your carpets forever and to always make sure that they are made of all natural and organic materials which means that they are safe for you to use and environmentally friendly as well. Mold and mildew must be quickly removed from your house. Never let mold and mildew get the most of your floor coverings and be prepared and select the exactly those products that are both safe and effective.
By making preventive measures then every corner of your house will not be unprotected to mold and mildew. You will end with have a safe haven for you and your family as it should be. You can still carry on in enjoying your carpeted floors and not worry of being controlled by and getting sick from mold and mildew. With the right products and information you will without a doubt do well in mold and mildew prevention.
Markus Skupeika
Web Entrepeneur
Most people do not realize that black mold can become toxic mold if not taken care of immediately. Learn which cleaning products will remove black mold safe and effectively.
By Markus Skupeika
Published: 4/23/2008
Monday, January 26, 2009
Home Sick (Not the Good Kind!): Household Toxins and How to Treat Them
by Lee Cameron
Are you finding yourself getting the sniffles when it's not allergy season, or feeling as if you're getting the flu when there's nothing going around? Believe it or not, your own home might be making you sick. Whether it's the chemicals in your furniture, hidden mold growing underneath your sink, or something even worse, you may not be as safe and healthy in your own home as you think.
Ironically, in a noble bid to make our planet healthier, we may be making our own homes unhealthier. Being efficient with our energy means having well-insulated homes. This is great for our heating and our air conditioning but not so great when we may have toxic air inside that can't get out.
It's important to know what some of the most common household toxins are and how you can get rid of them.
Radon
Next to smoking, radon gas is the leading cause of lung cancer. This colorless, odorless gas seeps from the soil and can make it's way undetected into any home in the country. Getting high levels of radon in your home is a very rare but very serious possibility. To protect yourself, buy a radon test kit from a hardware store (they can run from $10 to $20 bucks) and place it in your home for two days. If levels are high, you'll have to hire a radon removal expert to come in and install a venting system.
Arsenic
Arsenic is a poison that has been linked to cancer and has a wide range of harmful side effects. Up until 2005, this chemical was used as a preservative for wood. Any home with a wooden deck, porch or fence built before 2005 may be at risk. The chemical can seep into the soil and kill nearby plants. It can also come off on your hands when touched, making it especially dangerous for children who like to put their hands in their mouths. If you're worried about the possibility of arsenic poisoning, the solution is pretty simple - treat the wood with an oil-based stain every year so that when it's touched, only the stain is touched and not the arsenic.
Lead
We've all heard of lead poisoning, which can effect the central nervous system and the kidneys. In the '70s, many homes were painted with lead-based paint. If this paint is ingested or inhaled (such as when it gets ground down to a fine powder on your windowsills) it can impair physical and mental development. Call your state housing department for a recommendation for private labs that do testing for lead. If the test comes back positive, make sure that you cover all your walls with a coat of encapsulant to prevent further contamination. You might also want to consider replacing those windows and baseboards if they've been around since the '70s.
Formaldehyde
This chemical has been known to cause allergy-like symptoms, as well as nausea and dizziness. Liver and central nervous system damage is possible through increased exposure. If you've recently added new floors, carpets or furniture to your home, you might be at risk to formaldehyde. The adhesive used to lay carpet and to hold together wood furniture and floors usually contains formaldehyde which then gets released into the air. The good thing is, formaldehyde dissipates into the air, so if you've had your new carpet for a few months, it should have all circulated away by now. If not, the solution is simply ventilation. Leave your windows open for a little while after you get that new furniture to allow it to properly dissipate. You can also ask the carpet company to let the carpeting air out in the factory for a few weeks before delivering it. If you really want to splurge, you can find improvements and furniture made using VOC (volatile organic compounds) free building materials, though these are generally more expensive than normal.
Mold
Though not quite as serious a risk as some of these other toxins, mold can exacerbate allergies and asthma and make your home a less comfortable place to live. Where there's water (and especially water damage) there's the possibility of mold. If you have a small amount, you can clean it yourself simply with water and detergent, but if you find a large amount of mold it might be best to contact a professional to prevent the mold spores from spreading around the house. This can get pricey, depending on how bad it is. Your homeowner's insurance may cover this, but be careful before you ask them. Insurance companies have recently started excluding mold coverage and admitting water damage to them may get you slapped with higher premiums and deductibles.
It is most likely that your home is perfectly safe, but if you find yourself feeling ill often while you're in your own house, you might want to consider checking for some of these toxins. Sometimes a little caution and prevention can save you a lot of grief down the road.
About the Author
Lee Cameron is the top Orlando real estate agent in the Central Florida real estate market. Lee has over 13 years of experience in the industry, and can guide you in the process of finding properties in Orlando.
Are you finding yourself getting the sniffles when it's not allergy season, or feeling as if you're getting the flu when there's nothing going around? Believe it or not, your own home might be making you sick. Whether it's the chemicals in your furniture, hidden mold growing underneath your sink, or something even worse, you may not be as safe and healthy in your own home as you think.
Ironically, in a noble bid to make our planet healthier, we may be making our own homes unhealthier. Being efficient with our energy means having well-insulated homes. This is great for our heating and our air conditioning but not so great when we may have toxic air inside that can't get out.
It's important to know what some of the most common household toxins are and how you can get rid of them.
Radon
Next to smoking, radon gas is the leading cause of lung cancer. This colorless, odorless gas seeps from the soil and can make it's way undetected into any home in the country. Getting high levels of radon in your home is a very rare but very serious possibility. To protect yourself, buy a radon test kit from a hardware store (they can run from $10 to $20 bucks) and place it in your home for two days. If levels are high, you'll have to hire a radon removal expert to come in and install a venting system.
Arsenic
Arsenic is a poison that has been linked to cancer and has a wide range of harmful side effects. Up until 2005, this chemical was used as a preservative for wood. Any home with a wooden deck, porch or fence built before 2005 may be at risk. The chemical can seep into the soil and kill nearby plants. It can also come off on your hands when touched, making it especially dangerous for children who like to put their hands in their mouths. If you're worried about the possibility of arsenic poisoning, the solution is pretty simple - treat the wood with an oil-based stain every year so that when it's touched, only the stain is touched and not the arsenic.
Lead
We've all heard of lead poisoning, which can effect the central nervous system and the kidneys. In the '70s, many homes were painted with lead-based paint. If this paint is ingested or inhaled (such as when it gets ground down to a fine powder on your windowsills) it can impair physical and mental development. Call your state housing department for a recommendation for private labs that do testing for lead. If the test comes back positive, make sure that you cover all your walls with a coat of encapsulant to prevent further contamination. You might also want to consider replacing those windows and baseboards if they've been around since the '70s.
Formaldehyde
This chemical has been known to cause allergy-like symptoms, as well as nausea and dizziness. Liver and central nervous system damage is possible through increased exposure. If you've recently added new floors, carpets or furniture to your home, you might be at risk to formaldehyde. The adhesive used to lay carpet and to hold together wood furniture and floors usually contains formaldehyde which then gets released into the air. The good thing is, formaldehyde dissipates into the air, so if you've had your new carpet for a few months, it should have all circulated away by now. If not, the solution is simply ventilation. Leave your windows open for a little while after you get that new furniture to allow it to properly dissipate. You can also ask the carpet company to let the carpeting air out in the factory for a few weeks before delivering it. If you really want to splurge, you can find improvements and furniture made using VOC (volatile organic compounds) free building materials, though these are generally more expensive than normal.
Mold
Though not quite as serious a risk as some of these other toxins, mold can exacerbate allergies and asthma and make your home a less comfortable place to live. Where there's water (and especially water damage) there's the possibility of mold. If you have a small amount, you can clean it yourself simply with water and detergent, but if you find a large amount of mold it might be best to contact a professional to prevent the mold spores from spreading around the house. This can get pricey, depending on how bad it is. Your homeowner's insurance may cover this, but be careful before you ask them. Insurance companies have recently started excluding mold coverage and admitting water damage to them may get you slapped with higher premiums and deductibles.
It is most likely that your home is perfectly safe, but if you find yourself feeling ill often while you're in your own house, you might want to consider checking for some of these toxins. Sometimes a little caution and prevention can save you a lot of grief down the road.
About the Author
Lee Cameron is the top Orlando real estate agent in the Central Florida real estate market. Lee has over 13 years of experience in the industry, and can guide you in the process of finding properties in Orlando.
Friday, January 23, 2009
Mold Problem In Houses & Treatment Methods
by 911 Restoration Mold colonies can grow inside building structures. The main problem with the presence of mold in buildings is the inhalation of mycotoxins. Molds may produce an identifiable smell. Growth is fostered by moisture. After a flood or major leak, mycotoxin levels are higher in the building even after it has dried out (source: CMHC). Food sources for molds in buildings include cellulose-based materials, such as wood, cardboard, and the paper facing on both sides of drywall, and all other kinds of organic matter, such as soap, dust and fabrics. Carpet contains dust made of organic matter such as skin cells. If a house has mold, the moisture may be from the basement or crawl space, a leaking roof, or a leak in plumbing pipes behind the walls. Insufficient ventilation can further enable moisture build-up. The more people in a space, the more humidity builds up. This is from normal breathing and perspiring. Visible mold colonies may form where ventilation is poorest, and on perimeter walls, because they are coolest, thus closest to the dew point. If there are mold problems in a house only during certain times of the year, then it is probably either too air-tight, or too drafty. Mold problems occur in airtight homes more frequently in the warmer months (when humidity reaches high levels inside the house, and moisture is trapped), and occur in drafty homes more frequently in the colder months (when warm air escapes from the living area into unconditioned space, and condenses). If a house is artificially humidified during the winter, this can create conditions favorable to mold. Moving air may prevent mold from growing since it has the same desiccating effect as lowering humidity. Keeping indoor air temperature higher than 74 °F (23.3 °C) also has an inhibiting effect on mold growth. Because common building materials are capable of sustaining mold growth, and mold spores are ubiquitous, mold growth in an indoor environment is typically related to an indoor water or moisture problem. Leaky roofs, building maintenance problems, or indoor plumbing problems can lead to mold growth inside homes, schools, or office buildings. Another common cause of mold growth is flooding. Removing one of the three requirements for mold reduces or eliminates the new growth of mold. These three requirements are 1) Moisture, 2) Food source for the mold spores (dust, dander, etc), and 3) Warmth (mold generally does not grow in cold environments). HVAC systems can create all three requirements for significant mold growth. The A/C system creates a difference in temperature that allows/causes condensation to occur. The high rate of dusty air movement through an HVAC system may create ample sources of food sources for the mold. And finally, since the A/C system is not always running - the ability for warm conditions to exist on a regular basis allows for the final component for active mold growth. Because the HVAC system circulates air contaminated with mold spores and sometimes toxins - it is vital to prevent any three of the environments required for mold growth. A) Highly effective return air filtration systems are available that eliminate up to 99.9% of dust accumulation (as compared to 5% elimination by typical HVAC air filters). These newer filtration systems usually require modification to existing HVAC systems to allow for the larger size of electrostatic 99.9% filters. However, thorough cleaning of the HVAC system is required before usage of high efficiency filtration systems will help. Once mold is established - the mold growth and dust accumulation must be removed. B) Insulation of supply air ducts helps to reduce or eliminate the condensation that ultimately creates the moisture required for mold growth. This insulation should be place externally on the air ducts, because internal insulation provides a dust capture and breeding ground for mold. If you suspect you are experiencing any mold issue within your indoor environment, immediate and professional assistant is required for mold testing and permanent mold abatement. Please call us at any time with any mold issue question or for a free mold inspection 888.243.6653. About the Author 911 Restoration is a leading restoration company nationwide, with over 30 years of experience with: water damage restoration, flood damage cleanup, disaster restoration & recovery, sewage damage removal, water damage repair. We are available 24/7 for any emergency call and offer free inspection for all of our services, call 1.888.243.6653 |
Tuesday, January 20, 2009
Detecting Black Mold In The Home: Signs, Dangers and Treatment
Though less common than other species, this toxic variety is not rare, and can cause life-threatening health problems. That's why it's so essential to determine the species as quickly as possible, as black mold detection must be dealt with promptly. Signs of black mold are numerous, the most prevalent being those that are water-related as it needs moisture in which to grow. Leaky pipes, a leaky roof, a damp basement or attic, condensation, flooding, blocked gutters that cause water to seep into the walls or any other kind of water intrusion certainly create mold-friendly environments. Areas with high humidity and buildings with poor ventilation are also prime locations for growth. n the most severe cases, black mold can even be fatal.
Those most vulnerable include people who already have weakened immune systems, as well as children and the elderly. To prevent your home and health from reaching this destructive point, use Advnt Biotechnologies mold test kits for early black mold detection. That way, if you do have a problem, you can start the treatment process right away. You should begin treatment by first resolving the moisture problem. If it's a leaky pipe, fix it. If it's flooding, dry out the area completely. Then seal off the area with plastic sheeting duct taped on doorways and air vents to prevent airborne spores from spreading throughout the house or building. For the same reason, turn off the air conditioning or heater. To clean the area, put on a mask, rubber gloves and clothes that cover as much skin as possible - preferably old clothes you can simply throw out with everything else when you're done. If the mold is completely dry, lightly mist it with water, as dry spores are more likely to become airborne.
Those most vulnerable include people who already have weakened immune systems, as well as children and the elderly. To prevent your home and health from reaching this destructive point, use Advnt Biotechnologies mold test kits for early black mold detection. That way, if you do have a problem, you can start the treatment process right away. You should begin treatment by first resolving the moisture problem. If it's a leaky pipe, fix it. If it's flooding, dry out the area completely. Then seal off the area with plastic sheeting duct taped on doorways and air vents to prevent airborne spores from spreading throughout the house or building. For the same reason, turn off the air conditioning or heater. To clean the area, put on a mask, rubber gloves and clothes that cover as much skin as possible - preferably old clothes you can simply throw out with everything else when you're done. If the mold is completely dry, lightly mist it with water, as dry spores are more likely to become airborne.
About the Author
We are a globally focused, biotechnology company located in Phoenix, Arizona. We are a leading manufacturer of quality rapid detection products for an array of today's most critical environmental concerns. Used by consumers and professionals alike, our products reflect the finest the industry has to offer. We incorporate highly advanced technologies, including our own proprietary processes, antibodies and reagents, while engaging both ISO-9001 and cGMP quality control standards.
Subscribe to:
Posts (Atom)