New players to paintball often go for the less expensive equipment and markers. This is comparable to how beginners of all sports usually start with equipment that doesn't cost an arm and a leg.
Less expensive markers will often use CO2, a power source that will work fine in most cases, but for those who want all the edge they can get to become a better paintballer, it is inferior to HPA (High Pressure Air).
Making the switch to compressed air (aka HPA) is a great idea for paintballers that want to have the best performance. Improved performance is the main reason for switching.
What is improved when you make the switch? Well first of all consistency is largely improved. CO2 doesn't like to provide consistent performance during periods of rapid fire. HPA however, provides consistent performance during rapid firing.
Consistency is important when you are shooting rapidly at a target. You want the paintballs to fly the same distance for each shot you fire. When CO2 doesn't expand fast enough, drop offs in distance occur.
In cold weather, CO2 really is a pain in the neck. Anyone who plays in cold weather often should definitely make the switch if they want consistency. HPA stays consistent in cold weather.
If you have ever had your gun sputter, choke, or stop working while you were shooting fast, you had liquid entered your gun and cause problems. During times of rapid fire you need a power source that won't cause these problems.
Do you sometimes have what looks like snow shooting out of your gun when it is cold outside? This is the telltale sign that liquid is starting to get into your gun.
Inside of your CO2 tank you have both liquid and gas. Paintball markers run well on gas, but when the liquid gets inside during rapid fire, it causes problems. Performance will suffer. HPA tanks are great because there is only gas in the tank.
Paintballers that want the best performance should make the switch to a compressed air tank. It is more consistent and will not give you problems in cold weather.
Less expensive markers will often use CO2, a power source that will work fine in most cases, but for those who want all the edge they can get to become a better paintballer, it is inferior to HPA (High Pressure Air).
Making the switch to compressed air (aka HPA) is a great idea for paintballers that want to have the best performance. Improved performance is the main reason for switching.
What is improved when you make the switch? Well first of all consistency is largely improved. CO2 doesn't like to provide consistent performance during periods of rapid fire. HPA however, provides consistent performance during rapid firing.
Consistency is important when you are shooting rapidly at a target. You want the paintballs to fly the same distance for each shot you fire. When CO2 doesn't expand fast enough, drop offs in distance occur.
In cold weather, CO2 really is a pain in the neck. Anyone who plays in cold weather often should definitely make the switch if they want consistency. HPA stays consistent in cold weather.
If you have ever had your gun sputter, choke, or stop working while you were shooting fast, you had liquid entered your gun and cause problems. During times of rapid fire you need a power source that won't cause these problems.
Do you sometimes have what looks like snow shooting out of your gun when it is cold outside? This is the telltale sign that liquid is starting to get into your gun.
Inside of your CO2 tank you have both liquid and gas. Paintball markers run well on gas, but when the liquid gets inside during rapid fire, it causes problems. Performance will suffer. HPA tanks are great because there is only gas in the tank.
Paintballers that want the best performance should make the switch to a compressed air tank. It is more consistent and will not give you problems in cold weather.
About the Author:
Before you go out and spend too much money on your paintball gear, check out all the paintball clothing for sale.
No comments:
Post a Comment